1, 从窑尾电力室供电到水泵房，需要现场给个路径，测量估算个大概长度；
1. From the power supply of the kiln tail power room to the pump room, it is necessary to give a path on site and measure and estimate the approximate length;

2，窑头和窑尾电力室是母排连接到新MCC柜，需核实一下原MCC柜内有无N排；
2. The power room at the head and end of the kiln is connected to the new MCC cabinet by the busbar, and it is necessary to verify whether there is an N row in the original MCC cabinet;

3，利旧设备表上 部分现场给了电缆长度，剩余无长度的希望现场能给出长度；
3. Part of the cable length is given on the old equipment table, and the remaining non-length is hoped that the length can be given on site;

4，多拍些现场照片 涉及到利旧设备的柜子排面和需改造的抽屉内部照片；
4. Take more on-site photos involving the cabinet surface of the old equipment and the inside of the drawer that needs to be transformed;