這是用戶在 2024-12-12 15:57 為 https://app.immersivetranslate.com/pdf-pro/20252e92-b201-4988-82d6-f9fd714f94b7 保存的雙語快照頁面，由 沉浸式翻譯 提供雙語支持。了解如何保存？

IEC 62040-1, 1st ED (2008)
IEC 62040-1，第 1 版 （2008）

TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING
測試和測量設備/允許的分包

R = R = R=\mathrm{R}= Required by Lab
R = R = R=\mathrm{R}= 實驗室要求
S = S = S=S= May be subcontracted
S = S = S=S= 可以分包
  • ‘RB’ = ‘Required Basic’; test and measurement equipment required for all equipment.
    'RB' = '必需的基本';所有設備都需要測試和測量設備。
  • ‘RT’ = ‘Required for telecom’; in addition to ‘RB’, required for testing apparatus with connection(s) to a telecommunication network.
    'RT' = '電信必需';除“RB”外，還需要連接到電信網路的測試設備。
Clause 62040-1 條款 62040-1 Reference Clause 60950 − 1  Reference   Clause  60950 − 1 [" Reference "],[" Clause "],[60950-1]\begin{gathered} \hline \text { Reference } \\ \text { Clause } \\ 60950-1 \end{gathered} Measurement/testing Reference clause IEC 60950-1 in ()
測量/測試 參考條款 IEC 60950-1 在 （） 中		 Testing / measuring equipment / material needed
測試/測量設備/所需材料		 Subcontracting 轉包
1.2 1.1.2 Ingress of water, Annex H
進水，附錄 H		 IP foreign object and water test apparatus per IEC 60529.
符合 IEC 60529 的 IP 異物和水測試設備。		 S
4.4 - Reference Loads 參考載荷 Simulated/artificial loads, Annex L.
類比/人工載荷，附錄 L。

注意： “由於這些模擬載荷可能非常不同，因此它們不需要在 CBTL 中提供，但可以由製造商提供”
Note:
"As these simulated loads may be very different, they need not to be available in the CBTL but may be supplied by the manufacturer"
Note: "As these simulated loads may be very different, they need not to be available in the CBTL but may be supplied by the manufacturer"| Note: | | :--- | | "As these simulated loads may be very different, they need not to be available in the CBTL but may be supplied by the manufacturer" |
4.6 1.6.2 Power interfaces (Input current)
電源介面（輸入電流）		 Amp-meter suitable for the current and waveform
適用於電流和波形的安培表		 RB
4.7.16 1.7.11 Durability of markings (Durability)
標記的耐久性 （Durability）		 Petroleum spirit (aliphatic solvent hexane or reagent grade hexane)/water/piece of cloth
石油溶劑（脂肪族溶劑己烷或試劑級己烷）/水/一塊布		 RB
4.7 .2 Power Rating 額定功率 Amp-Voltage meter for input and output, power meter, power factor meter
輸入和輸出用安培電壓表、功率計、功率因數計		 RB
4.7.13 5.1 High leakage current (Touch current and protective conductor current)
高漏電流（接觸電流和保護導體電流）		 Measuring instruments of Annex D
附錄 D 的測量儀器		 RB
4.7 .20 5.1 .3 4.7 .20 5.1 .3 {:[4.7.20],[5.1.3]:}\begin{gathered} 4.7 .20 \\ 5.1 .3 \end{gathered} 2.1.1.5

電池 為用於限制訪問區域的UPS提供保護（能源危險）
Battery
Protection for UPS intended to be used in restricted access areas (Energy Hazard)
Battery Protection for UPS intended to be used in restricted access areas (Energy Hazard)| Battery | | :--- | | Protection for UPS intended to be used in restricted access areas (Energy Hazard) |
 Variable resistive load 可變電阻負載 RB
Clause 62040-1 " Reference Clause 60950-1" Measurement/testing Reference clause IEC 60950-1 in () Testing / measuring equipment / material needed Subcontracting 1.2 1.1.2 Ingress of water, Annex H IP foreign object and water test apparatus per IEC 60529. S 4.4 - Reference Loads Simulated/artificial loads, Annex L. "Note: "As these simulated loads may be very different, they need not to be available in the CBTL but may be supplied by the manufacturer"" 4.6 1.6.2 Power interfaces (Input current) Amp-meter suitable for the current and waveform RB 4.7.16 1.7.11 Durability of markings (Durability) Petroleum spirit (aliphatic solvent hexane or reagent grade hexane)/water/piece of cloth RB 4.7 .2 Power Rating Amp-Voltage meter for input and output, power meter, power factor meter RB 4.7.13 5.1 High leakage current (Touch current and protective conductor current) Measuring instruments of Annex D RB "4.7.20 5.1.3" 2.1.1.5 "Battery Protection for UPS intended to be used in restricted access areas (Energy Hazard)" Variable resistive load RB| Clause 62040-1 | $\begin{gathered} \hline \text { Reference } \\ \text { Clause } \\ 60950-1 \end{gathered}$ | Measurement/testing Reference clause IEC 60950-1 in () | Testing / measuring equipment / material needed | Subcontracting | | :---: | :---: | :---: | :---: | :---: | | 1.2 | 1.1.2 | Ingress of water, Annex H | IP foreign object and water test apparatus per IEC 60529. | S | | 4.4 | - | Reference Loads | Simulated/artificial loads, Annex L. | Note: <br> "As these simulated loads may be very different, they need not to be available in the CBTL but may be supplied by the manufacturer" | | 4.6 | 1.6.2 | Power interfaces (Input current) | Amp-meter suitable for the current and waveform | RB | | 4.7.16 | 1.7.11 | Durability of markings (Durability) | Petroleum spirit (aliphatic solvent hexane or reagent grade hexane)/water/piece of cloth | RB | | 4.7 .2 | | Power Rating | Amp-Voltage meter for input and output, power meter, power factor meter | RB | | 4.7.13 | 5.1 | High leakage current (Touch current and protective conductor current) | Measuring instruments of Annex D | RB | | $\begin{gathered} 4.7 .20 \\ 5.1 .3 \end{gathered}$ | 2.1.1.5 | Battery <br> Protection for UPS intended to be used in restricted access areas (Energy Hazard) | Variable resistive load | RB |
IEC SYSTEM FOR CONFIRMITY TESTING AND CERTIFICATION OF ELECTRICAL EQUIPMENT
用於電氣設備確認測試和認證的 IEC 系統
Clause 62040-1 條款 62040-1 Reference Clause 60950-1 參考條款 60950-1

測量/測試 參考條款 IEC 60950-1 在 （） 中
Measurement/testing
Reference clause IEC 60950-1 in ()
Measurement/testing Reference clause IEC 60950-1 in ()| Measurement/testing | | :--- | | Reference clause IEC 60950-1 in () |
 Testing / measuring equipment / material needed
測試/測量設備/所需材料		 Subcontracting 轉包
5.1.1 2.1.1.7 Protection for UPS intended to be used in operator access areas (Plug discharge)
保護用於操作員存取區域的 UPS（插頭放電）		 Measuring instrument with input impedance 100M Ω Ω Omega\Omega ± 5 M Ω ± 5 M Ω +-5MOmega\pm 5 \mathrm{M} \Omega in parallel with an input capacitance of 25 pF or less.
輸入阻抗為 100M Ω Ω Omega\Omega ± 5 M Ω ± 5 M Ω +-5MOmega\pm 5 \mathrm{M} \Omega 並聯且輸入電容為 25 pF 或更小的測量儀器。		 RB
5.1.3 2.1.1.1

為用於限制訪問區域的 UPS 提供保護 （訪問通電部件）
Protection for UPS intended to be used in restricted access areas
(Access to energized parts)
Protection for UPS intended to be used in restricted access areas (Access to energized parts)| Protection for UPS intended to be used in restricted access areas | | :--- | | (Access to energized parts) |
 Test finger (joint /rigid 30N, fig. 2A)
測試指（接頭/剛性 30N，圖 2A）		 RB
Test pin (fig. 2B/ Ø4mm/Ø3mm/15 mm long)
測試針（圖 2B/ Ø4mm/Ø3mm/15 mm 長）		 RB
Test probe (Fig. 2C, Ø12mm/80mm)
測試探針 （圖 2C， Ø12mm/80mm）		 RB
5.2.3 2.4.2 Limited current circuits (Limited current circuits, limit values)
限流電路 （限流電路、限值）		 Resistor 2000 Ω ± 10 % 2000 Ω ± 10 % 2000 Omega+-10%2000 \Omega \pm 10 \%, Capacitance measuring device
電阻器 2000 Ω ± 10 % 2000 Ω ± 10 % 2000 Omega+-10%2000 \Omega \pm 10 \% ， 電容測量裝置		 RB
5.1 .4 5.3 .2 5.1 .4 5.3 .2 [5.1.4],[5.3.2]\begin{aligned} & \hline 5.1 .4 \\ & 5.3 .2 \end{aligned} 2.10 Backfeed protection Protective earthing
反向饋電保護 保護接地
(Creepage distance/clearance/distance through insulation (determination of requirements; working voltage measurements))
（爬電距離/電氣間隙/絕緣距離（要求確定;工作電壓測量））		 Oscilloscope 示波器 RB
(Creepagedistance/clearance/distance through insulation (measurements))
（爬電距離/電氣間隙/通過絕緣的距離（測量））		 Dial gauge 千分表 RB
Micrometer 千分尺 RB
Pins etc. With different diameters
引腳等具有不同的直徑		 RB
Microscope 顯微鏡 RB
2.10.3.9 (Measurement of transient levels)
（瞬態水平測量）		 Test-generator; reference 2 of table N. 1
測試生成器;表 N. 1 的參考文獻 2		 S
2.10.4 (Creepage distances) （爬電距離） Test equipment for tracking index per IEC 60112
符合 IEC 60112 的漏電起痕指數測試設備		 S
2.10.9 & 2.10.10 & 2.10.11 (and 2.10.8.2)
2.10.9 & 2.10.10 & 2.10.11 （以及 2.10.8.2）		 (Thermal cycling and thermal ageing)
（熱迴圈和熱老化）		 Full draught oven ( ± 2 ∘ C ± 2 ∘ C (+-2^(@)C:}\left( \pm 2^{\circ} \mathrm{C}\right. ) Cooling facility ( 0 ∘ C ) 0 ∘ C (0^(@)C)\left(0^{\circ} \mathrm{C}\right)
全通風箱 ( ± 2 ∘ C ± 2 ∘ C (+-2^(@)C:}\left( \pm 2^{\circ} \mathrm{C}\right. ） 冷卻設施 ( 0 ∘ C ) 0 ∘ C (0^(@)C)\left(0^{\circ} \mathrm{C}\right) 		S
2.10.8.4 (Abrasion resistance test)
（耐磨性測試）		 Scratch test device with steel pin
帶鋼針的劃痕測試裝置		 S
2.10.7 (Enclosed and sealed parts)
（封閉和密封部件）		 See 2.10.9 & 2.10.10 參見2.10.9 & 2.10.10 S
3.1.5, 3.1.9 and 4.2.2 3.1.5、3.1.9 和 4.2.2 (10 N steady force test)
（10 N 穩態力測試）		 Suitable tool for applying steady force of 10 N + / − 1 N 10 N + / − 1 N 10N+//-1N10 \mathrm{~N}+/-1 \mathrm{~N}
施加穩定力 10 N + / − 1 N 10 N + / − 1 N 10N+//-1N10 \mathrm{~N}+/-1 \mathrm{~N} 的合適工具		 RB
5.3 .2 8.2 5.3 .2 8.2 [5.3.2],[8.2]\begin{gathered} 5.3 .2 \\ 8.2 \\ \hline \end{gathered} 5.2

保護接地 電氣強度 （Electric strength）
Protective earthing
Electric strength (Electric strength)
Protective earthing Electric strength (Electric strength)| Protective earthing | | :--- | | Electric strength (Electric strength) |
 Test equipment with the relevant voltage and tripping current.
測試設備具有相關的電壓和跳閘電流。		 RB
Clause 62040-1 Reference Clause 60950-1 "Measurement/testing Reference clause IEC 60950-1 in ()" Testing / measuring equipment / material needed Subcontracting 5.1.1 2.1.1.7 Protection for UPS intended to be used in operator access areas (Plug discharge) Measuring instrument with input impedance 100M Omega +-5MOmega in parallel with an input capacitance of 25 pF or less. RB 5.1.3 2.1.1.1 "Protection for UPS intended to be used in restricted access areas (Access to energized parts)" Test finger (joint /rigid 30N, fig. 2A) RB Test pin (fig. 2B/ Ø4mm/Ø3mm/15 mm long) RB Test probe (Fig. 2C, Ø12mm/80mm) RB 5.2.3 2.4.2 Limited current circuits (Limited current circuits, limit values) Resistor 2000 Omega+-10%, Capacitance measuring device RB "5.1.4 5.3.2" 2.10 Backfeed protection Protective earthing (Creepage distance/clearance/distance through insulation (determination of requirements; working voltage measurements)) Oscilloscope RB (Creepagedistance/clearance/distance through insulation (measurements)) Dial gauge RB Micrometer RB Pins etc. With different diameters RB Microscope RB 2.10.3.9 (Measurement of transient levels) Test-generator; reference 2 of table N. 1 S 2.10.4 (Creepage distances) Test equipment for tracking index per IEC 60112 S 2.10.9 & 2.10.10 & 2.10.11 (and 2.10.8.2) (Thermal cycling and thermal ageing) Full draught oven (+-2^(@)C:} ) Cooling facility (0^(@)C) S 2.10.8.4 (Abrasion resistance test) Scratch test device with steel pin S 2.10.7 (Enclosed and sealed parts) See 2.10.9 & 2.10.10 S 3.1.5, 3.1.9 and 4.2.2 (10 N steady force test) Suitable tool for applying steady force of 10N+//-1N RB "5.3.2 8.2" 5.2 "Protective earthing Electric strength (Electric strength)" Test equipment with the relevant voltage and tripping current. RB| Clause 62040-1 | Reference Clause 60950-1 | Measurement/testing <br> Reference clause IEC 60950-1 in () | Testing / measuring equipment / material needed | Subcontracting | | :---: | :---: | :---: | :---: | :---: | | 5.1.1 | 2.1.1.7 | Protection for UPS intended to be used in operator access areas (Plug discharge) | Measuring instrument with input impedance 100M $\Omega$ $\pm 5 \mathrm{M} \Omega$ in parallel with an input capacitance of 25 pF or less. | RB | | 5.1.3 | 2.1.1.1 | Protection for UPS intended to be used in restricted access areas <br> (Access to energized parts) | Test finger (joint /rigid 30N, fig. 2A) | RB | | | | | Test pin (fig. 2B/ Ø4mm/Ø3mm/15 mm long) | RB | | | | | Test probe (Fig. 2C, Ø12mm/80mm) | RB | | 5.2.3 | 2.4.2 | Limited current circuits (Limited current circuits, limit values) | Resistor $2000 \Omega \pm 10 \%$, Capacitance measuring device | RB | | $\begin{aligned} & \hline 5.1 .4 \\ & 5.3 .2 \end{aligned}$ | 2.10 | Backfeed protection Protective earthing | | | | | | (Creepage distance/clearance/distance through insulation (determination of requirements; working voltage measurements)) | Oscilloscope | RB | | | | (Creepagedistance/clearance/distance through insulation (measurements)) | Dial gauge | RB | | | | | Micrometer | RB | | | | | Pins etc. With different diameters | RB | | | | | Microscope | RB | | | 2.10.3.9 | (Measurement of transient levels) | Test-generator; reference 2 of table N. 1 | S | | | 2.10.4 | (Creepage distances) | Test equipment for tracking index per IEC 60112 | S | | | 2.10.9 & 2.10.10 & 2.10.11 (and 2.10.8.2) | (Thermal cycling and thermal ageing) | Full draught oven $\left( \pm 2^{\circ} \mathrm{C}\right.$ ) Cooling facility $\left(0^{\circ} \mathrm{C}\right)$ | S | | | 2.10.8.4 | (Abrasion resistance test) | Scratch test device with steel pin | S | | | 2.10.7 | (Enclosed and sealed parts) | See 2.10.9 & 2.10.10 | S | | | 3.1.5, 3.1.9 and 4.2.2 | (10 N steady force test) | Suitable tool for applying steady force of $10 \mathrm{~N}+/-1 \mathrm{~N}$ | RB | | $\begin{gathered} 5.3 .2 \\ 8.2 \\ \hline \end{gathered}$ | 5.2 | Protective earthing <br> Electric strength (Electric strength) | Test equipment with the relevant voltage and tripping current. | RB |
IEC SYSTEM FOR CONFIRMITY TESTING AND CERTIFICATION OF ELECTRICAL EQUIPMENT
用於電氣設備確認測試和認證的 IEC 系統

第 編號 62040-1
Clause
62040-1
Clause 62040-1| Clause | | :--- | | 62040-1 |
 Reference Clause 60950-1 參考條款 60950-1

測量/測試 參考條款 IEC 60950-1 在 （） 中
Measurement/testing
Reference clause IEC 60950-1 in ()
Measurement/testing Reference clause IEC 60950-1 in ()| Measurement/testing | | :--- | | Reference clause IEC 60950-1 in () |
 Testing / measuring equipment / material needed
測試/測量設備/所需材料		 Subcontracting 轉包
7.3 4.2.3 Mechanical strength (Steady force test 30 N)
機械強度（穩態力測試 30 N）		 Test finger (rigid 30 N ± 3 N 30 N ± 3 N 30N+-3N30 \mathrm{~N} \pm 3 \mathrm{~N}, fig. 2A)
測試指（剛性 30 N ± 3 N 30 N ± 3 N 30N+-3N30 \mathrm{~N} \pm 3 \mathrm{~N} ，圖 2A）		 RB
4.2.4 Mechanical strength (Steady state force, 250 N)
機械強度（穩態力，250 N）		 Test tool 250 N ± 10 N 250 N ± 10 N 250N+-10N250 \mathrm{~N} \pm 10 \mathrm{~N} with a circular plan surface ∅ ∅ O/\varnothing 30mm.
具有圓形平面 ∅ ∅ O/\varnothing 30 毫米的測試工具 250 N ± 10 N 250 N ± 10 N 250N+-10N250 \mathrm{~N} \pm 10 \mathrm{~N} 。		 RB
4.2.5 Mechanical strength (Impact test)
機械強度（衝擊試驗）		 ∅ 50 mm / 500 g ± 25 g ∅ 50 mm / 500 g ± 25 g O/50mm//500g+-25g\varnothing 50 \mathrm{~mm} / 500 \mathrm{~g} \pm 25 \mathrm{~g} steel ball  ∅ 50 mm / 500 g ± 25 g ∅ 50 mm / 500 g ± 25 g O/50mm//500g+-25g\varnothing 50 \mathrm{~mm} / 500 \mathrm{~g} \pm 25 \mathrm{~g} 鋼球 RB
4.2.6 Mechanical strength (Drop test)
機械強度（跌落測試）		 Hard wood 13 mm on 18 mm ± 2 mm 18 mm ± 2 mm 18mm+-2mm18 \mathrm{~mm} \pm 2 \mathrm{~mm} plywood, two layers.
硬木 13 毫米， 18 mm ± 2 mm 18 mm ± 2 mm 18mm+-2mm18 \mathrm{~mm} \pm 2 \mathrm{~mm} 膠合板，兩層。		 RB
4.2.7 Mechanical strength (Stress relief)
機械強度（應力消除）		 Measuring equipment according tp IEC 60695-10-3 or Oven 70K over normal temp.
測量設備符合 IEC 60695-10-3 標準或高於常溫的 70K 卡氏爐。		 RB
4.2.8 Mechanical strength (Cathode ray tube)
機械強度（陰極射線管）		 Test equipment acc. IEC 60065
測試設備符合 IEC 60065 標準		 S
4.2.10 Mechanical strength (Wall or ceiling mounted equipment)
機械強度（壁掛式或天花板安裝設備）		 Several weights 多個權重 RB
5.3.3 2.6.3.4 Protective bonding (Resistance of earthing conductors)
保護性連線（接地導體的電阻）		 High current source with a voltage <12V
電壓 <12V 的大電流源		 RB
6.2.1 3.2.5.1 General provisions for connection to power (AC Power Supply Cords)
電源連接的一般規定（交流電源線）		 Test equipment according IEC 60227
符合 IEC 60227 標準的測試設備		 S
3.2.6 General provisions for connection to power (Cord anchorage and strain relief)
連接電源的一般規定（電線固定和應力消除）		 Appropriate weights 適當的權重 RB
3.2.8 General provisions for connection to power (Cord guards)
連接電源的一般規定（護線）		 See 3.2.6 見 3.2.6 RB

力 250N/ 800 N 平面測試工具 12,5 釐米 12,5 釐米 12,5 釐米12,5 \mathrm{~cm} x 20 釐米
Force 250N/
Test tool 800 N with a flat surface 12 , 5 cm 12 , 5 cm 12,5cm12,5 \mathrm{~cm} by 20 cm
Force 250N/ Test tool 800 N with a flat surface 12,5cm by 20 cm| Force 250N/ | | :--- | | Test tool 800 N with a flat surface $12,5 \mathrm{~cm}$ by 20 cm |
 RB
7.1 6.2.1

外殼 （分離要求）
Enclosure
(Separation requirements)
Enclosure (Separation requirements)| Enclosure | | :--- | | (Separation requirements) |
 Test probe (Fig. 2C, 12mm/80mm)
測試探針 （圖 2C， 12mm/80mm）		 RT
7.2 4.1. Stability (Stability) 穩定性 （Stability） Inclined plane 10 ∘ 10 ∘ 10^(@)10^{\circ} 斜面 10 ∘ 10 ∘ 10^(@)10^{\circ} RB
7.4.1 Construction details 施工細節 Force 15N/20N/30N/50N 力 15N/20N/30N/50N RB
"Clause 62040-1" Reference Clause 60950-1 "Measurement/testing Reference clause IEC 60950-1 in ()" Testing / measuring equipment / material needed Subcontracting 7.3 4.2.3 Mechanical strength (Steady force test 30 N) Test finger (rigid 30N+-3N, fig. 2A) RB 4.2.4 Mechanical strength (Steady state force, 250 N) Test tool 250N+-10N with a circular plan surface O/ 30mm. RB 4.2.5 Mechanical strength (Impact test) O/50mm//500g+-25g steel ball RB 4.2.6 Mechanical strength (Drop test) Hard wood 13 mm on 18mm+-2mm plywood, two layers. RB 4.2.7 Mechanical strength (Stress relief) Measuring equipment according tp IEC 60695-10-3 or Oven 70K over normal temp. RB 4.2.8 Mechanical strength (Cathode ray tube) Test equipment acc. IEC 60065 S 4.2.10 Mechanical strength (Wall or ceiling mounted equipment) Several weights RB 5.3.3 2.6.3.4 Protective bonding (Resistance of earthing conductors) High current source with a voltage <12V RB 6.2.1 3.2.5.1 General provisions for connection to power (AC Power Supply Cords) Test equipment according IEC 60227 S 3.2.6 General provisions for connection to power (Cord anchorage and strain relief) Appropriate weights RB 3.2.8 General provisions for connection to power (Cord guards) See 3.2.6 RB "Force 250N/ Test tool 800 N with a flat surface 12,5cm by 20 cm" RB 7.1 6.2.1 "Enclosure (Separation requirements)" Test probe (Fig. 2C, 12mm/80mm) RT 7.2 4.1. Stability (Stability) Inclined plane 10^(@) RB 7.4.1 Construction details Force 15N/20N/30N/50N RB| Clause <br> 62040-1 | Reference Clause 60950-1 | Measurement/testing <br> Reference clause IEC 60950-1 in () | Testing / measuring equipment / material needed | Subcontracting | | :---: | :---: | :---: | :---: | :---: | | 7.3 | 4.2.3 | Mechanical strength (Steady force test 30 N) | Test finger (rigid $30 \mathrm{~N} \pm 3 \mathrm{~N}$, fig. 2A) | RB | | | 4.2.4 | Mechanical strength (Steady state force, 250 N) | Test tool $250 \mathrm{~N} \pm 10 \mathrm{~N}$ with a circular plan surface $\varnothing$ 30mm. | RB | | | 4.2.5 | Mechanical strength (Impact test) | $\varnothing 50 \mathrm{~mm} / 500 \mathrm{~g} \pm 25 \mathrm{~g}$ steel ball | RB | | | 4.2.6 | Mechanical strength (Drop test) | Hard wood 13 mm on $18 \mathrm{~mm} \pm 2 \mathrm{~mm}$ plywood, two layers. | RB | | | 4.2.7 | Mechanical strength (Stress relief) | Measuring equipment according tp IEC 60695-10-3 or Oven 70K over normal temp. | RB | | | 4.2.8 | Mechanical strength (Cathode ray tube) | Test equipment acc. IEC 60065 | S | | | 4.2.10 | Mechanical strength (Wall or ceiling mounted equipment) | Several weights | RB | | 5.3.3 | 2.6.3.4 | Protective bonding (Resistance of earthing conductors) | High current source with a voltage <12V | RB | | 6.2.1 | 3.2.5.1 | General provisions for connection to power (AC Power Supply Cords) | Test equipment according IEC 60227 | S | | | 3.2.6 | General provisions for connection to power (Cord anchorage and strain relief) | Appropriate weights | RB | | | 3.2.8 | General provisions for connection to power (Cord guards) | See 3.2.6 | RB | | | | | Force 250N/ <br> Test tool 800 N with a flat surface $12,5 \mathrm{~cm}$ by 20 cm | RB | | 7.1 | 6.2.1 | Enclosure <br> (Separation requirements) | Test probe (Fig. 2C, 12mm/80mm) | RT | | 7.2 | 4.1. | Stability (Stability) | Inclined plane $10^{\circ}$ | RB | | 7.4.1 | | Construction details | Force 15N/20N/30N/50N | RB |