LED wall lights
Government Households:
Thank you for purchasing our LED products, for your better use, please read this manual carefully before use, so that it can be used correctly, and please keep this manual.
Please entrust an electrician to install the lamps; Before installation, please check the installation accessories of the lamp: manual, accessory package;
Please ask the installation company to hand over this manual to the user for maintenance and repair.
| LUMALIOHT |
|
| DATA SHEET | |
| RATED POWER | 30w |
| BODY SIZE |
|
| WORKING VOLTAG |
|
| FREQUENCY |
|
| LUMEN FLUX |
|
| CCT |
|
| CRI | 80 |
| BEAM ANGLE | 180 |
| IP | 20 |
| BODY MATERIAL | Iron+Si1ica Ge1 |
Safety Precautions:
【Warning】
■ Please install it strictly according to the instructions.
If the installation is improper, it is easy to cause major accidents such as falling off, electric shock, and fire.
Do not modify the lamps or adjust the parts by yourself to avoid accidents such as falling off, breakage, and electric shock.
【Attention】
In order to ensure safety, please entrust the responsibility of electrician professionals when repairing or inspecting lamps, as non-professional construction is prone to danger.
■ When repairing, please read the name and installation method of each component, and confirm the model and parameters on the label attached to the chassis of the lamp.
-
Do not use the power supply beyond the specified range (rated voltage: AC220-260V frequency); Prolonged use above the rated voltage range may cause the luminaire to overheat and cause product failure. -
The lamp is non-waterproof, and improper use will cause poor insulation, resulting in electric shock or leakage. -
Do not install it directly above high-temperature objects such as stoves, gas and exhaust cylinders to avoid undesirable accidents. -
Do not use the dimmer switch.
-
When the power is turned on and the light does not turn on, make sure that the wiring is correct and good.
-
Do not install the lamp in the place shown in the figure below.
