Wen'an County Blue Shield Machinery Manufacturing Co. Ltd.

尊敬的客户 您好/ Dear Sir！
Dear Customer, Hello/Dear Sir!

感谢您对我司的支持，现结合贵公司产品要求，将有关设备参数、配置提供给贵司，以供参考选择。
Thank you for your support to our company, and now combined with your company's product requirements, we will provide the relevant equipment parameters and configurations to your company for reference and selection.

Thanks for your support and trust to our company. The equipment parameters, configuration in accordance with your requests as below, for your reference.

一．设备报价
One. Equipment quotation

注；本价格为出厂价，含 13%增值税，有效期壹个月。设备生产周期 55天
Concentrate; The price is ex-works, inclusive of 13% VAT, valid for one month. The production cycle of the equipment is 55 days

1.设备介绍
1. Equipment introduction

1、液压系统：
1. Hydraulic system:

1.1 台湾台达驱动+韵升伺服电机+海特克油泵+台湾YUKEN液压阀
1.1 Taiwan Delta Drive + Yunsheng Servo Motor + Hytek Oil Pump + Taiwan YUKEN Hydraulic Valve

1.2 台湾油研品牌液压阀，移模位移采用日本OMRON光电开关控制，换向迅速，柔和无
1.2 Taiwan Youyan brand hydraulic valve, the mold displacement is controlled by Japanese OMRON photoelectric switch, the reversal is fast, soft and non-existent

噪音。

1.3 液压胶管、接头和密封件选用英国 Hallite 美国固特异品牌
1.3 Hydraulic hoses, fittings and seals are made of Hallite and Goodyear brands

2、电器系统；
2. an electrical system;

2.1 壁厚控制系统：MOOG 飞天瑞 （无）
2.1 Wall Thickness Control System: MOOG (None)

2.2 温控组件采用进口自动温控模块
2.2 The temperature control component adopts imported automatic temperature control module

2.3 法国施耐德接触器
2.3 French Schneider contactors

2.4 变频器选用；深圳阿尔法
2.4 Inverter selection; Shenzhen Alpha

3、挤出部分：
3. Extrusion part:

3.1 螺杆、料筒采用 38CrMoALA 优质合金钢并离子氮化处理，耐磨、
3.1 The screw and barrel are made of 38CrMoALA high-quality alloy steel and ionized nitriding treatment, which is wear-resistant,

抗腐蚀、寿命长。
Corrosion-resistant and long-lasting.

3.2 螺杆型式采用渐变，带销钉混炼头，使原料的塑化均匀，混色效
3.2 The screw type adopts gradient and adopts a pin mixing head to make the plasticization of raw materials uniform and the color mixing effect

果显著，且可视原料不同配备不同的螺杆型式。
The fruit is significant, and it can be equipped with different screw types depending on the raw material.

3.3 主电机变频器调节控制，比普通电机节电约 40%以上，无噪音。
3.3 The main motor inverter is adjusted and controlled, which saves about 40% more electricity than ordinary motors, and has no noise.

3.4 主机整体可自由升降，前后可适当范围内调整，以适应大小不同
3.4 The whole host can be raised and lowered freely, and the front and rear can be adjusted within an appropriate range to adapt to different sizes

的模具，并实现废边的最佳长度。
molds and achieve the optimal length of the scrap edges.

4、储料模头和吹气系统：
4. Storage die head and blowing system:

4.1 储料模头芯棒螺旋叠加式，料坯强度好、壁厚均匀、换色快。
4.1 The storage die mandrel is spiral superimposed, with good billet strength, uniform wall thickness and fast color change.

4.2 吹气系统专业化人性设计，吹嘴可全方位调整，可三维调节，以
4.2 The blowing system is professionally designed with human nature, and the mouthpiece can be adjusted in all directions and in three dimensions

适应不同形体的中空制品。
Hollow products suitable for different shapes.

5、合模部分：德国专家优化设计，符合欧洲标准
5. Mold clamping part: German experts optimize the design, in line with European standards

5.1 曲臂式合模导向，采用双平移高精度双直线导轨(阻力小，速
5.1 Crank-arm clamping guide, using double translation, high-precision double linear guide (low resistance, speed

度快，导向精度高，耐磨损寿命长)
Fast degree, high guiding accuracy, long wear resistance life)

5.2 曲臂式锁模结构，移模速度快，锁模力大，稳定可靠。
5.2 Curved arm clamping structure, fast mold transfer speed, large clamping force, stable and reliable.

5.3 自润轴承代替传统合模铜套，避免设备润滑油的污染。
5.3 Self-lubricating bearings replace the traditional clamping copper sleeve to avoid the pollution of equipment lubricating oil.

6 / 44

1、自动中空吹塑成型机
1. Automatic hollow blow molding machine

设备基本配置及参数 ;LDA75-5L单工位
Basic configuration and parameters of the equipment; LDA75-5L single station

1、基本参数 General Issues
1. Basic parameters: General Issues

1.1 所有页面应有中英文
1.1 All pages should be in both English and Chinese

1.2 设备操作说明包括液压、气动、操作系统、冷却
1.2 Equipment operating instructions include hydraulics, pneumatics, operating systems, and cooling

1.3 最大制品容积；8L
1.3 Maximum product volume; 8L

1.4 设备重量约：5.5ton
1.4 Equipment weight about: 5.5ton

2、开合模 Clamping Unit

2.1 合模装置为曲臂式，容模空间大且更换模具方便
2.1 The clamping device is a curved arm type, which has a large mold space and is convenient to replace the mold

2.2 直线导轨运动
2.2 Linear guide movement

2.3 锁模力：74KN
2.3 Clamping force: 74KN

2.4 模板尺寸 W x H 440X350mm
2.4 Template size W x H 440X350mm

2.5 模板开距：180-580 mm
2.5 Template opening distance: 180-580 mm

3、模头 Die Head

3.1 连续式结构模头
3.1 Continuous structure die

3.2 先进先出
3.2 First in, first out

3.3 储料缸容积：无
3.3 Storage cylinder volume: none

3.4 口模直径：145mm
3.4 Die diameter: 145mm

3.5 200点轴向壁厚控制（无）
3.5 200 points axial wall thickness control (none)

3.6 热电偶类型：K
3.6 Thermocouple type: K

3.7 模头加热功率；2.2 KW
3.7 Die heating power; 2.2 KW

4、挤出系统 Extruder System
4. Extruder System

4.1 适合加工原料：HDPE, PP
4.1 Suitable raw materials: HDPE, PP

4.2 螺杆直径：75mm
4.2 Screw diameter: 75mm

4.3 机筒、螺杆氮化处理
4.3 Barrel and screw nitriding treatment

4.4 塑化能力：80kg /h
4.4 Plasticizing capacity: 80kg/h

4.5 进料段有冷却水套强制冷却
4.5 There is a cooling water jacket for forced cooling in the feed section

4.7 热电偶类型：K
4.7 Thermocouple type: K

4.8 挤出电机功率：18.5KW
4.8 Extrusion motor power: 18.5KW

4.9 陶瓷加热器，加不锈钢外包
4.9 Ceramic heater, with stainless steel outlay

4.10 加热功率：11 KW
4.10 Heating power: 11 KW

4.11 7 组风机冷却
4.11 7 sets of fans for cooling

4.12 料斗有检测原料水平面视窗
4.12 The hopper has a horizontal window for detecting raw materials

5、吹气装置 Blow System
5. Blow System

5.1 根据模具要求专用吹气装置
5.1 Special blowing device according to the requirements of the mold

6、自动取出装置 Take out system
6. Take out system

6.1 取出装置行程 450mm
6.1 The stroke of the take-out device is 450mm

6.2 采用直线导轨副和同步传送链条的电机实现进退
6.2 The motor of linear guide pair and synchronous transmission chain is used to realize advance and retreat

6.3 取出卡钳带水冷功能
6.3 Remove the caliper with water cooling function

7、伺服液压系统 Servo Hydraulic System
7. Servo Hydraulic System

7.1 伺服电机：韵升伺服电机 -11KW
7.1 Servo motor: Yunsheng servo motor -11KW

7.2 伺服驱动器：台湾台达
7.2 Servo drive: Taiwan Delta

7.3 伺服阀：日本MOOG（无） 阿托斯 （无）
7.3 Servo Valve: Japan MOOG (None) Athos (None)

7.4 伺服油源:4KW （无）
7.4 Servo oil source: 4KW (none)

7.5 齿轮泵: 海特克油泵
7.5 Gear Pump: Hetek Oil Pump

7.6 主阀：台湾油研
7.6 Main valve: Taiwan Oil Research Institute

7.7 电机功率：11kW台湾台达伺服油泵
7.7 Motor power: 11kW Taiwan Delta servo oil pump

8、气动系统 Pneumatic System

8.1 气源过滤减压
8.1 Air source filtration and decompression

8.2 气缸：亚德客
8.2 Cylinder: AirTAC

8.3 气阀：亚德客
8.3 Air Valve: AirTAC

8.4 气动元件最大使用压力：10 bar
8.4 Maximum operating pressure of pneumatic components: 10 bar

8.5 气源压力：8 bar
8.5 Air pressure: 8 bar

8.6 有独立的高低压吹气功能
8.6 It has independent high and low pressure blowing function

8.7 耗气量：1.0m3/min
8.7 Air consumption: 1.0m3/min

9、电控系统 Control System
9. Electronic control system Control System

9.1 控制系统：日本OMRON（无）
9.1 Control system: Japan OMRON (none)

9.2 伺服壁厚控制系统：日本MOOG （无）
9.2 Servo Wall Thickness Control System: Japan MOOG (None)

9.3德国西门子触摸屏
9.3 German Siemens touch screen

9.5 紧急停止按钮
9.5 Emergency Stop Button

9.6 总进线：AC380V 50Hz 三相四线，控制弱电 DC24V
9.6 Main incoming line: AC380V 50Hz three-phase four-wire, control weak current DC24V

9.7 总功率：约 55 KW
9.7 TOTAL POWER: APPROX. 55 KW

9.8 平均功耗：16KW
9.8 Average power consumption: 16KW

9.9 部件:(空气开关,接触器）施耐德; 中间继电器: 施耐德
9.9 Components: (Air Switches, Contactors) Schneider; Intermediate Relay: Schneider

9.10 直流调速器 ETD
9.10 DC Governor ETD

9.11 电位尺：GEFRAN
9.11 Potentiometer: GEFRAN

9.12 接近开关：日本OMRON
9.12 Proximity switch: OMRON in Japan

10、 冷却水 Cooling water

10.1 模具、模头、吹气、油箱冷却单独控制
10.1 Separate control of mold, die, blowing and oil tank cooling

10.2 冷却水用量：15 m3/h
10.2 Cooling water consumption: 15 m3/h

11、设备整体 Machine frame
11. The overall machine frame of the device

11.1 合模装置有一定位移以便于更换模具
11.1 The clamping device has a certain displacement to facilitate the replacement of the mold

11.2 设备挤出机平台有升降功能
11.2 The extruder platform of the equipment has a lifting function

11.3 设备颜色可根据客户提供喷涂
11.3 The color of the equipment can be sprayed according to the customer's customer

11.4 设备的外形尺寸约：LxWxH3.8m x2.1m x2.7m
11.4 The overall dimensions of the equipment are about: LxWxH3.8m x2.1m x2.7m

营业执照；
License;

“信任源于品质”，蓝盾机械凭借雄厚的企业综合实力，将不断提高产品质量，完善技术服务，更好的满足客户要求，携手国内外客户共创塑机产业的美好明天！
"Trust comes from quality", Landun Machinery will continue to improve product quality, improve technical services, better meet customer requirements, and work with domestic and foreign customers to create a better tomorrow for the plastic machine industry!

  文安县蓝盾机械制造有限公司
Wen'an County Landun Machinery Manufacturing Co., Ltd

  电话；03165338137 15230623881

  地址；河北省廊坊市文安县安里工业区
Address; Anli Industrial Zone, Wen'an County, Langfang City, Hebei Province