This is a bilingual snapshot page saved by the user at 2024-8-10 11:49 for https://app.immersivetranslate.com/pdf-pro/uploading/, provided with bilingual support by Immersive Translate. Learn how to save?
2024_08_10_8dd2f58076803739ee28g

 Warranty


HH KAN Q8 WLAN PT Camera Quick Start Guide

Online PDF: hikam.de/q8neu-pdf-de


Deutsche Version: hikam.de/q8new-pdf-en

 1. Product Description


(Image not binding. The product looks slightly different from what is shown here.) (Note: for self-testing, the Q 8 will move horizontally and vertically after takeoff*)


2. Set up your camera and connect it to Wi-Fi

 2.1 Preparation


Please check the following before using your camera for the first time:

Your router has a 2.4 GHz frequency band

Your phone is connected to the same Wi-Fi network that you want the camera to connect to.

Smartphone and camera must be close to the router for setup, within a radius of max. 3 meters.

(after commissioning, the camera can be placed further away)

The Wi-Fi password (network key) is known to you

If you have any problems using our product, please contact us by email (address below); We will reply within 24 hours. Your suggestions are also always welcome, we are always grateful for your feedback that will help us improve the device, software and app.


Service e-mail:
service@hikam.de

 Further instructions:

 Note


This quick start guide contains some instructions for the camera. Due to the small package size, further information on functions, using a micro SD card, fault diagnosis, etc. is included in a PDF, which can be found via this link: https://hikam.de/q8neu-pdf-de
\footnotetext{

Connect the camera to the power, it will start

(Note: for self-testing, it will move horizontally and vertically after starting*) Wait 40 to 60 seconds, the status LED on the camera will flash red and blue

If not, please reset the camera. (see Chapter 5)
 2.3 HiKam Pro App

Search for the "HiKam Pro" app in the App Store (iPhone) or Google Play (Android) and install it for free.

D. Download on th
App Store

GETITON

Google Play

Create a new account in the HiKam Pro app by tapping "New User Registration" at the bottom.

(If you already have an account in the HiKam Pro app, just log in)

 2.4 Setting up the camera


The app will guide you through the configuration step by step

  1. Launch the HiKam Pro app, click the + button in the top right corner to add a new camera

  2. From the "Alternative Methods" > menu options, select "Smart Scan Q8 2023" and then follow the instructions in the app.

  3. Make sure that the network displayed is the one you want the camera to connect to (must be -Wi-Fi), enter the correct Wi-Fi password (network key), tap "Next".

Note: if the Wi-Fi name here is not that of the network you want the camera to connect to, go to your phone's Wi-Fi settings, connect it to the appropriate Wi-Fi network, and try again from the beginning

 2.2 Turn on the camera


  1. Hold the smartphone about 15 cm away in front of the camera so that the QR code is readable by the camera.

When the camera has successfully scanned the QR code, you will hear


a short beep from the camera.
 Click "Continue"

(In some cases, the app will automatically move on to the next step and display the next page right away.)

  1. The app will now find and add the camera. You will then be asked to name the camera and assign it a new, secure password.

Now the camera is added to the app, you can watch the live video.

Tip: After the camera is added, you can now change its settings


2.5 Alternative setup methods


The camera can also be set up via AP mode. Try these methods if Smart Scan fails


Setup via AP mode:


In HiKam Pro, click the "," button in the top right corner and select AP Mode. Fashion. Follow the instructions in the app to complete the setup.


3. Add camera on more smartphones


Once the camera is set up and connected to your Wi-Fi, you can add the Q8 to other smartphones. For more information, see the online PDF under hikam.de/q8neupdf-de in the section '3. Add camera on more smartphones'.

- 5 - hikam.de/support


Factory reset. The status LED on the camera will flash red and blue.


6. Micro SD card slot


Gently turn the camera head up until you see the marked part.

There you will find the reset button and the slot for the microSD card (microSD card not included).

Insert the card with the contact side (metal side) facing up.

The camera supports microSD cards


from 4 GB to 256 GB .

Both the FAT32 and exFAT formats are supported on the microSD card.


7. Camera in the Alexa Echo Show, via

 Integrate ONVIF/RTSP

Alexa Echo Show:


You can find instructions here: https://hikam.de/alexa
ONVIF/RTSP:

Here are the appropriate instructions: https://hikam.de/onvif

 8. Fault diagnosis


The status LED provides information about the status of the camera.
 LED Display Status
 No display, LED off  No electricity

 4. Functions


The camera supports features such as remote access for video and audio, pan-tilt control, two-way audio, night vision, motion detection, and more. The camera can also be controlled remotely via the HiKam Pro app on your smartphone

For a detailed feature guide and information, visit the online PDF at hikam.de/q8neu-pdf-de for detailed information


5. Factory reset camera


If necessary, you can reset the camera to restore all settings made by the user, including Wi-Fi settings and camera password, to factory status.

To reset the camera:

  1. The camera must be powered. After about 30 seconds, the status LED will light up. Wait a few more seconds before moving on to step 2.

  2. On the top of the camera is the "RESET" hole (as shown in the image above). Use the included reset pin (included in the product box) to press it for about 3 seconds until you hear a beep. Release the button immediately after hearing the beep

(In case you press it for about 6 to 10 seconds and hear two beeps, wait 1 minute and then repeat the process from the first step to reset the camera)

  1. Wait about 30 seconds, the camera has been set to the - 6 - hikam.de/support

Pink throughout (blue+red)

Powered, starts, please wait
 Flashing blue

Camera has been reset (and beeps) Press the reset button for 3 seconds to reset the camera into this mode (see chapter 2) Or live video transmission (camera does not beep) This display can be turned off via the app.
 Flashing blue and red

AP Mode - Press the reset button for 10 seconds to reset the camera in this mode. - The camera sends its own Wi-Fi
 Solid blue

Camera is connected to the router via Wi-Fi. This display can be deactivated via the app.
 Flashing red

Incorrect Wi-Fi password Please reset the camera and try again (see chap. 5).
 Solid red

Wi-Fi signal too weak or Wi-Fi SSID not found. Please bring the camera closer to the router or check the strength of the Wi-Fi signal on the Camera location.

Solid blue with red flashing

Assignment of the IP address failed. Please enable DHCP in the router settings and disable the MAC filter.

 U-Declaration of Conformity


High Infinity Technology GmbH hereby declares that the radio equipment type IP camera HiKam Q8 WLAN PT camera complies with Directives 2014/53/EU and 2011/65/EU

The full text of the EU declaration of conformity is available at the following internet address: https://hikam.de/dl/DoC Q8.pdf

 Security


Please make sure that the USB power plug is plugged into a freely accessible socket (not hidden behind furniture) so that it can be unplugged immediately if necessary

 Technical specifications:


Frequency band: 2.4 GHz ; Maximum Transmitting Power (EIRP):

The complete data sheet can be found at the following Internet address: https://hikam.de/dl/hikam_q8_Datasheet.pd
High Infinity Technology GmbH
Freiburgerstr. 9
79312 Emmendingen, Germany