Installation instructions
Connect the water inlet hose to the water inlet pipe interface of the product, and the other end of the water inlet hose is connected and fixed with the water storage tank containing drinking water. This product should be placed above the highest water mark of the water tank. After everything is installed and confirmed, the power can be turned on.
Instructions
Power switch: Press and hold for 3 seconds to power on/off: Tap to switch between constant temperature and home mode (P1 and P2).
P1: Constant temperature mode, when there is no water, the kettle will automatically add water for 45 seconds, when the kettle has water, heat to 100 degrees and enter the constant temperature mode.
P2: Home mode, when there is no water, the kettle will automatically add water for 45 seconds, when the kettle has water, it will heat to 100 degrees, and it will automatically shut down after 15 minutes of unmanned operation.
Manually add water: click to add water, add water to the kettle for 25 seconds, when adding water, click anytime (on/off) at any time, and automatically heat up after stopping adding water.
The kettle is protected by a 2-second delay in reheating
Personalized dark program adjustment: In the shutdown state (OFF or the light is fully off), press and hold the "Manual Water Filling" button for 3 seconds (L1, L2, L3, L4, L5, L6, L7).
Set your own water boiling point (the water is not boiled enough, or the boiling temperature of the water does not show the 100 degree adjustment method)
After selecting L1, click the "on/off key" to adjust the boiling point (80-100).
Thermostatic power regulation
After selecting L2, click the "on/off key" to adjust the constant temperature power (P1-70WP2-80WP3-90WP4-100WP5-120WP6-150WP7-200W).
Set the time to add water
After selecting L3, click the "on/off key" to adjust the water filling time (20-60 seconds)
Constant water addition or dry boiling (the pot is placed on the base, and the pot needs to be filled with water and higher than the probe)
After selecting L4, click the "on/off key" to view the value, you need to increase the value of L5 by 20-30, for example, if the value of L4 is 35, you can adjust the value of L5 to 55.
Broadcast voice on\ off
After L6 is selected, click the ON key to adjust the position (00--turn off the broadcast voice, 01--turn on the broadcast voice).
Lighting adjustment (base has light off product)
After selecting L7, click the "on/off key" to adjust (00-off light, 01 strong light, 02-comfort,--03--dim, 04-breathing mode).
E1: NTC short circuit (damage to the probe, internal short circuit, broken wire contact with external metal, or temperature control upper and lower seat inaccessibility of the fault code).
E2: NTC open circuit (the fault code that occurs when the kettle is lifted, or the upper and lower seats of the temperature control cannot be contacted).
E8: If the water is not detected, shut down directly (when adding water, there is no water source, the pump is empty, and the kettle temperature control steel ball is blocked
Fault code for non-water occurrence)
E9: Abnormal zero-crossing (no constant temperature)
|
This product does not take into account the following: use of appliances by unattended young children and people with disabilities; The situation of young children playing with equipment. Before use:
1. If the power cord is damaged, it must be replaced by a professional from the manufacturer, its maintenance department, or a similar department to avoid danger.
2. Warning: Close the lid to prevent steam from spraying onto the handle.
3. Warning: Do not move the lid of the kettle when the water is boiling. When the water is boiling, do not place your hands on the spout or above the lid to avoid being scalded by the steam coming out.
4. If the kettle is too full, boiling water may squirt.
5. Electric kettle and cuper pot should only be used on the base provided.
6. The amount of water filled in the electric kettle cannot exceed the "maximum water level" or "MAX" scale mark in the kettle.
7. When using glass products, please be careful to avoid glass damage and cuts. If the glass of the machine is broken, it should be shut down immediately and unplugged, and sent to the company's designated service station for repair.
8. It is necessary to use a grounding socket with a rated current of more than 12A and a rated voltage of 220V~; Do not use it with other electrical appliances at the same time on the universal socket; Do not use inferior sockets.
9. It is strictly forbidden to dry boil the kettle body, which will cause the deformation of the kettle body and the damage of the product.
10. The product should be kept away from high temperature and flammable materials.
11. The product should be supervised by adults during the working process to prevent children from operating, so as not to cause danger.
12. When not in use, remove the power plug from the electrical outlet. Otherwise, it can cause injury, scalding, electric shock, leakage, and fire due to deterioration of insulation.
13. If the product fails or is damaged, please go to the service station designated by the company for repair, and the user should not disassemble and repair it by himself.
14. The drinking bucket should not be placed higher than the product.
15. Do not insert pins, wires or other items into the electric kettle, any gap or opening in the base, to avoid electric shock.
| 16. During the use of the electric kettle, it is a normal phenomenon that the body of the kettle becomes hot! When pouring water, you can only use the handle to carry the jug.
17. When adding water to the kettle, not using, cleaning or moving the electric kettle, it must be ensured that the power supply is disconnected.
18. This product must be placed on the water platform surface to work, and it is forbidden to use this product on an inclined or unstable table.
19. It is strictly forbidden to immerse this appliance in water and any liquid to avoid danger.
20. This product can only be used to boil water, and cannot heat other objects other than water (such as: seaweed, eggs, soybean milk, tea, milk, noodles, etc.), otherwise the product may fail functionally.
21. When you do not use the water pump of the machine to add water, please remove the electric kettle from the base and then add water, and wipe the water traces at the bottom of the electric kettle before placing it on the power base.
22. When using it for the first time, add water to the highest water level and boil it 1 to 2 times to clean the inside of the kettle.
23. If there is no water in the pot, please do not dry boil! Otherwise, the stainless steel chassis will be discolored; Dry boiling multiple times will reduce the lifespan of the kettle.
24. When pulling the plug, never use the power cord to pull the power cord plug.
25. Do not allow the power cord to hang from the edge of the countertop, and avoid the cord touching the hot surface of the electric kettle or getting knotted.
26. Do not place the electric kettle or pedestal in a damp place or immerse it in water; Do not operate this product when your hands are wet.
27. When the surface temperature of the electric kettle does not drop to normal temperature during and after the work is completed, please do not let children approach. 28. When the water pump fills the kettle, do not lift the kettle, otherwise it will spray water to the machine base, causing damage or leakage of the machine. 29. When placing an empty kettle, press down lightly to ensure that the base is in good contact with the kettle.
30. When the kettle has water and is placed for a long time, there will be a small amount of water seepage at the bottom, which is a normal phenomenon.
31. When this product is stored, the water in the water pipe should be discharged first, the water inlet pipe can be removed from the water storage bucket, and then the water can be added until no water is pumped out, so as to ensure that there is no residual water inside the machine, and then wipe the machine clean with a soft cloth, cover it with a plastic bag and package it completely, and finally put it into the color box for preservation.
32. Must be used with matching connectors, please place the electric teapot in a level and stable place when using.
|