这是用户在 2024-11-14 10:18 为 https://www.techpowerup.com/forums/threads/amd-ati-flash-command-line-cmd-syntax-mini-guide-windows.... 保存的双语快照页面,由 沉浸式翻译 提供双语支持。了解如何保存?
  • Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

AMD/ATi Flash Command Line (CMD) Syntax Mini Guide (WINDOWS)
AMD/ATi Flash 命令行 (CMD) 语法迷你指南 (WINDOWS)

Status
Not open for further replies.

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
41,978 (6.62/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
This is a Guide Thread Only, not an asking for help thread.
这只是一个指南主题,而不是寻求帮助的主题。


If you need help, start a new thread, do not post in here as it will be reported and possibly deleted.
如果您需要帮助,请开始一个新的帖子,不要在这里发帖,因为它会被举报并可能被删除。


This is a Mini Guide to using AMDVBFLASH/ATi Flash.
这是使用 AMDVBFLASH/ATi Flash 的迷你指南。


DO NOT USE WINFLASH it has been discontinued and rearely ever worked
不要使用 WINFLASH,它已停产并且从未工作过


Make sure to identify which card you want to flash by using the commands below.
确保使用以下命令确定要刷写的卡。


If you have a CPU with igp thats fine otherwise a motherboard with 2 pcie slots for recovery is suggested, otherwise a spi flasher may be your last chance.
如果你有一个带 igp 的 CPU,那很好,否则建议使用带有 2 个 pcie 插槽的主板进行恢复,否则 spi flasher 可能是你最后的机会。


If you have a dual gpu bios card, only flash 1, not both so to make recovery easier.
如果您有双 GPU BIOS 卡,则只刷 1,不能同时刷 1 个,以便于恢复。


GET GPU-Z and look at your Device ID and Subsystem ID to the right, make a note of it, same with your clock speeds, ram size, ram brand
获取 GPU-Z 并查看右侧的设备 ID 和子系统 ID,记下它,与您的时钟速度、内存大小、内存品牌相同

Example Sapphire RX 580 Pulse: 1002 67DF 1DA2 E353/366, 1366/2000 MHz, 8192/4096 MB, Micron, Samsung, Hynix, Eplida, Infineon, Qimonda.
蓝宝石 RX 580 脉冲示例:1002 67DF 1DA2 E353/366、1366/2000 MHz、8192/4096 MB、美光、三星、海力士、Eplida、Infineon、Qimonda。


Sapphire cards have a P/N and SKU sticker for easier ID of files (E*** is a part of the subsystem id of your bios you need), either the sticker is on the card back or on the side of the heatsink by the pcie blade.
蓝宝石卡有 P/N 和 SKU 贴纸,以便于文件 ID(E*** 是您需要的 BIOS 子系统 ID 的一部分),贴纸在卡背面或 pcie 刀片旁的散热器侧面。


In GPU-Z 在 GPU-Z 中
Go to the Advanced Tab and click on the context menu General and Select Memory Timings, You should see 1 that matches your ram on the page with detailed info of the Chip Types, Samsung FB/FC, Hynix AJR/MJR etc.
转到高级选项卡,然后单击上下文菜单常规并选择内存时序,您应该会在页面上看到 1 与您的 ram 匹配,其中包含芯片类型、三星 FB/FC、海力士 AJR/MJR 等的详细信息。

Write that info down. 把这些信息写下来。

Go on VGA Bios Collection and find the correct bios for your card by all criteria you wrote above.
继续 VGA Bios Collection 并根据您上面编写的所有标准为您的显卡找到正确的 BIOS。


Then Get the latest version of AMDVBFLASH/ATiFlash
然后获取最新版本的 AMDVBFLASH/ATiFlash


https://www.techpowerup.com/download/ati-atiflash/

Then follow this: 然后按照这个操作:

For RX 5000-7000 Navi Series and I believe Vega Cards, maybe Fury...
对于 RX 5000-7000 Navi 系列和我相信 Vega 卡,也许是 Fury......

AMDVBFLASH
Versions 3.31-5.0.567 版本 3.31-5.0.567

Follow these steps carefully:
请仔细按照以下步骤操作:


1. Open your "C:" drive in Windows, create a new folder, call it atiflash.
1. 在 Windows 中打开你的 “C:”驱动器,创建一个新文件夹,命名为 atiflash。


2. Extract the contents of amdvbflash_win_5.0.567.zip to the "C:\atiflash" folder (make sure everything is in C:\atiflash and not another folder)
2. 将amdvbflash_win_5.0.567.zip的内容解压到“C:\atiflash”文件夹(确保所有内容都在 C:\atiflash 中,而不是其他文件夹中)


3. Find the bios file you downloaded and rename the bios file to a 5 digit with .rom on the end, example RX 6900XT, name file r6900.rom (r****.rom)
3. 找到您下载的 bios 文件,并将 bios 文件重命名为 5 位数字,末尾为 .rom,例如 RX 6900XT,名称文件r6900.rom (r****.rom)


4. Move your bios r****.rom to the "C:\atiflash" folder
4. 将 bios r****.rom 移动到“C:\atiflash”文件夹


5.Open the directory/folder, double click AMDVBFlashDriverInstaller.exe and allow it to install
5.打开目录/文件夹,双击 AMDVBFlashDriverInstaller.exe 并允许其安装

YOU MUST INSTALL THIS FOR AMDVBFLASH TO WORK, YOU CAN UNINSTALL IT USING THE EXACT SAME .EXE
您必须安装此 AMDVBFLASH 才能正常工作,您可以使用完全相同的 .EXE 卸载它


6. Open the start menu, type cmd, when cmd.exe appears right click it and hit "Run as administrator"
6. 打开开始菜单,键入 cmd,当cmd.exe出现时右键单击它并点击“以管理员身份运行”


7. At the command prompt type in cd\ and press enter until only C:\> is on the screen.
7. 在命令提示符下键入 cd\ 并按 Enter,直到屏幕上只有 C:\>。


8. Type in cd/atiflash and press enter, you should see C:\atiflash>
8. 输入 cd/atiflash 并按 Enter,您应该会看到 C:\atiflash>


9. At C:\atiflash> type in amdvbflash.exe -i to identify your card with a 0, 1, or 2
9. 在 C:\atiflash> 输入 amdvbflash.exe -i 以用 0、1 或 2 标识您的卡


10. At the C:\atiflash> prompt type in
10. 在 C:\atiflash> 提示符下键入

amdvbflash.exe -p 0 r****.rom -fa -fp (or 1, 2)
amdvbflash.exe -p 0 r******.rom -fa -fp (或 1, 2)


(there is a space between amdvbflash.exe and -p, a space between -p and 0, a space between 0 and r****.rom, a space between r****.rom and -fa, and a space between -fa and -fp)
(amdvbflash.exe 和 -p 之间有一个空格,-p 和 0 之间有一个空格,0 和 r****.rom 之间有一个空格,r****.rom 和 -fa 之间有一个空格,-fa 和 -fp 之间有一个空格)


Press Enter. 按 Enter 键。

Follow directions on screen and if flash is successful exit the command prompt and restart, windows should show up on monitor.
按照屏幕上的指示进行操作,如果 Flash 成功,则退出命令提示符并重新启动,窗口应显示在显示器上。


ATI Flash 2.93+ is for RX 5700 series, you can get it via the zip file below
ATI Flash 2.93+ 适用于 RX 5700 系列,您可以通过下面的 zip 文件获取它


For RX 500 Series (Polaris) and Older:
对于 RX 500 系列 (Polaris) 及更早版本:


Get amdvbflash 2.93 获取 amdvbflash 2.93

https://www.techpowerup.com/download/ati-atiflash/

Then look for Version 4.68, underneath 4.68 you will see a link to show older version, click that and you should see version 2.93
然后查找版本 4.68,在 4.68 下方,您将看到一个显示旧版本的链接,单击该链接,您应该会看到版本 2.93


Follow these steps carefully:
请仔细按照以下步骤操作:


1. Open your "C:" drive in Windows, create a new folder, call it atiflash.
1. 在 Windows 中打开你的 “C:”驱动器,创建一个新文件夹,命名为 atiflash。


2. Extract the contents of atiflash_293.zip to the "C:\atiflash" folder
2. 将 atiflash_293.zip 的内容解压到“C:\atiflash”文件夹中


3. Find the bios file you downloaded and rename the bios file to 5 digits with .rom on end Example RX 580, change file to rx580.rom (r****.rom)
3. 找到您下载的 bios 文件,并将 bios 文件重命名为 5 位数字,末尾为 .rom示例 RX 580,将文件更改为 rx580.rom (r****.rom)


4. Move r****.rom to the "C:\atiflash" folder
4. 将 r****.rom 移动到“C:\atiflash”文件夹


5. Open the start menu, type cmd, when cmd.exe appears right click it and hit "Run as administrator"
5. 打开开始菜单,键入 cmd,当cmd.exe出现时右键单击它并点击“以管理员身份运行”


6. At the command prompt type in cd\ and press enter until only C:\> is on the screen.
6. 在命令提示符下键入 cd\ 并按 Enter,直到屏幕上只有 C:\>。


7. Type in cd/atiflash and press enter, you should see C:\atiflash>
7. 输入 cd/atiflash 并按 Enter,您应该会看到 C:\atiflash>


8. Type in amdvbflash.exe -i to identify the gpu you want to flash with a 0, 1, or 2)
8. 键入 amdvbflash.exe -i 以识别要闪烁的 GPU(带 0、1 或 2)


9. At the C:\atiflash> prompt type in
9. 在 C:\atiflash> 提示符下,键入

amdvbflash.exe -unlockrom 0
(there is a space between the e and -unlockrom and 0)(0 is the number zero)
(E 和 -unlockrom 之间有一个空格,还有 0)(0 是数字 0)

press enter and you will be prompted that the "ROM Unlocked" (or 1, 2)
按 Enter,系统将提示您“ROM 已解锁”(或 1、2)


10. At the C:\atiflash> prompt type in
10. 在 C:\atiflash> 提示符下键入

amdvbflash.exe -f -p 0 r****.rom
(there is a space between the .exe and -f, and a space between -f and -p and 0).
(.exe 和 -f 之间有一个空格,-f 和 -p 之间有一个空格)。

(Or 1, 2) (或 1、2)

Press Enter 按 Enter 键

Follow directions on screen and if flash is successful exit the command prompt and restart, windows should show up on screen.
按照屏幕上的指示进行操作,如果 Flash 成功,则退出命令提示符并重新启动,窗口应显示在屏幕上。


Also there are other Tools for overclocking on this link here
此外,此链接上还有其他超频工具 这里


 

Attachments 附件

  • atiflash293plus.zip
    176.5 KB · Views: 613
    176.5 KB ·浏览量:613
Last edited:

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
41,978 (6.62/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
Also make sure to have the gpu that you want flashed plugged in directly into the slot you want to flash, not on a extension cable.

So on non IGP/APU systems you should have the working display card in and then the card you want to flash (bricked card)


Dual bios cards that have 1 side working:

Make sure to boot up on working bios then in windows flip to dead bios, flash dead bios and boot up on that side.

If it failed, power off and flip switch to working side and repeat above.
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
41,978 (6.62/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
MAKE SURE BEFORE YOU THINK IT IS A REASON TO FLASH ANY GPU, UPDATE YOUR MOTHERBOARD BIOS FIRST!
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
41,978 (6.62/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
Alternate guide to the above.

Download atiflash/amdvbflash 2.93

Follow these steps carefully:

1. Open your "C:" drive in Windows, create a new folder, call it atiflash.

2. Extract the contents of atiflash_293.zip to the "C:\atiflash" folder

3. Find the bios file you downloaded and rename the bios file to biosname.rom

(Biosname.rom is just an example, change it to match your card model in 5 characters with .rom on end)

4. Move biosname.rom to the "C:\atiflash" folder

5. Open the start menu, type cmd, when cmd.exe appears right click it and hit "Run as administrator"

6. At the command prompt type in cd\ and press enter until only C:\> is on the screen.

7. Type in cd/atiflash and press enter, you should see C:\atiflash>

8. At the C:\atiflash> prompt type in
amdvbflash.exe -unlockrom 0
(there is a space between the e and -unlockrom and 0)(0 is the number zero)
press enter and you will be prompted that the "ROM Unlocked"

9. At the C:\atiflash> prompt type in
amdvbflash.exe -f -p 0 biosname.rom
(there is a space between the .exe and -f, and a space between -f and -p and 0)press enter.

Follow directions on screen and if flash is successful exit the command prompt and restart, windows should show up on screen.
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
41,978 (6.62/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
Joined
Jun 26, 2018
Messages
3 (0.00/day)
System Name The Classified
Processor Intel i7-4790K
Motherboard EVGA Z97 Classified
Cooling EVGA Hydro Copper Waterblock
Memory Corsair Vengeance Pro 32GB
Video Card(s) EVGA GeForce RTX 2080TI Kingpin 11GB GDDR6
Thank you eidairaman1 for this simple guide, you easily transported me back to 2016 when I first had to flash a card from the command line. Tonight I brought a card back to life from that era that I had been putting off this simple procedure, but I just couldn't remember the steps, although I knew all the basic steps. Many other versions of your instruction out there, but I settled on yours, fellow Texan, due to brevity and clarity, not to mention the fact that it's housed here in TPU.

Besides expressing gratitude, I have a question, and it is about the very crucial all important section of your instructions, and I quote here:

then type in amdvbflash -unlockrom 0

then type in amdvbflash -p -fa -fp 0 biosname.rom
(-fs command is optional and may not work in all versions)

Now, in the parentheses under the key instruction where you say to type the program [amdvbflash] and then the arguments [-p -fa -fp], you then say:
(-fs command is optional and may not work in all versions)

When you reference -fs, is that a typo? You are stipulating -fa and -fp as arguments, and I did go and run amdvbflash -? (I remembered something on my own!) and I don't see an -fs option. It makes sense you are referring to either the -fa or -fp argument as optional and "may not work in all versions." But I want to know if I'm missing something, please.

That tiny little thing gave me pause, but I went ahead and ran exactly as you had typed for this RX580 I'm working on, and it flashed like a charm thanks to you. Just had to ask this question because it might trip up someone else that hasn't done this before, make them overthink it maybe. The phrase "may not work" worries the hell out of me!

I appreciate you took the time to type out these instructions, I can't stand trying to learn from spoken-word video, I get lost. I have to see it in writing, and in its static form where I can progress at my own studied pace. And I read all the subsequent variations you also added, but fortunately your first iteration did the trick right off the bat.

I started following you not long ago and have read some of your old replies and valiant attempts to help people who don't know what they're doing. While this is normal for all help situations, I'm talking about the people with no rhyme or reason for their efforts, and I understand completely your one post basically disowning and abandoning extending help to this genre of hackers. That said, sometime on another thread or somehow I'd love to message you about the quirky practice MSI employed with their RX580s and similar around 2017, inexplicably using slightly different vBIOSes on batches of essentially identical cards, which affect their performance if you use say TV341MH.612 instead of TV341MH.614. There are several and can be different between cards basically exactly the same for model, even make of memory. And I still see people on your forums here as well as elsewhere seeking these vBIOS files, which can only be matched by decoding the serial number of the card as to which batch it comes from. If you see someone seeking help on these particular series of cards in the RX470/480 and RX570/580 family, both 4GB and 8GB, they have a special challenge in front of them. I have compiled a bit of a repository of 12 so far; there are three I think represented here on TPU for my RX580 in question, but there are others from the factory, and I had to come up with a unique way to harvest them from the official MSI forum, where the moderators can no longer help with this issue, yea barely discuss it, since around 2019. And I do see more in the "unverified" section, but I'll never be that adventurous. The ones I have are factory.

Cheers, Sir!
"Come and Take It!"
[on Reddit I go by EBTexas]
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
41,978 (6.62/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
For RX 580, just use the 2nd guide with amdvbflash 2.93
 
Joined
Jun 16, 2013
Messages
1,457 (0.35/day)
Location
Australia
With obtaining my new card, I notice Asus have this bios/tool to upgrade the bios on my card. If & only IF I wanted to upgrade the bios on this card, should I use the Asus software or use this tool you have talked about in this thread?
Curios to know as I have never upgraded or flashed a dGPU bios before but am aware of the hazards in doing this.
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
41,978 (6.62/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
With obtaining my new card, I notice Asus have this bios/tool to upgrade the bios on my card. If & only IF I wanted to upgrade the bios on this card, should I use the Asus software or use this tool you have talked about in this thread?
Curios to know as I have never upgraded or flashed a dGPU bios before but am aware of the hazards in doing this.

Hey man sometimes those Live Update Tools Provide the Wrong Bios, don't do it.

You should only update a bios if you are having a glitch (black screen) after other troubleshooting measures failed.
 
Joined
Feb 28, 2015
Messages
94 (0.03/day)
After bios flash I bricked GPU and cannot flash back due in AMDVBFLASH I getting Invalid GPU Index
and -i show Test Fail any idea how to solve it ?
 

Attachments

  • errr.jpg
    errr.jpg
    110.1 KB · Views: 1,424

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
41,978 (6.62/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
After bios flash I bricked GPU and cannot flash back due in AMDVBFLASH I getting Invalid GPU Index
and -i show Test Fail any idea how to solve it ?
Start a new thread
 

beejac

New Member
Joined
Jun 18, 2023
Messages
3 (0.01/day)
Thank you for this guide. I just did some research to upgrade the vbios on my Radeon VII but was unable to to use the 293 version of atiflash as windows kept blocking the program "Due to win8 enhanced security features...". Must be something in W11 blocking. However, instead I used version 315 of ATIflash and it worked like a charm. So, if you are facing same issue as me, try the 315 version instead! :)
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
41,978 (6.62/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
Thank you for this guide. I just did some research to upgrade the vbios on my Radeon VII but was unable to to use the 293 version of atiflash as windows kept blocking the program "Due to win8 enhanced security features...". Must be something in W11 blocking. However, instead I used version 315 of ATIflash and it worked like a charm. So, if you are facing same issue as me, try the 315 version instead! :)
Its because it is a vega, i revised the guide and 3.31-5.0+ support vega or newer
 

beejac

New Member
Joined
Jun 18, 2023
Messages
3 (0.01/day)
Its because it is a vega, i revised the guide and 3.31-5.0+ support vega or newer
Forgot to mention, but i tried the 5.0+ and it did not recognise my card, so it did not allow a flash either (i tried and it gave an error). This is why I went down the route of trying an older version. Maybe Radeon VII was removed from 5.0+ as the user base is so small, or maybe erased by mistake - but this is just me guessing.

Thanks for keeping the guide up-to-date! :)
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
41,978 (6.62/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
Forgot to mention, but i tried the 5.0+ and it did not recognise my card, so it did not allow a flash either (i tried and it gave an error). This is why I went down the route of trying an older version. Maybe Radeon VII was removed from 5.0+ as the user base is so small, or maybe erased by mistake - but this is just me guessing.

Thanks for keeping the guide up-to-date! :)
Did you install the driver required for flashing that was provided in 3.31-5.0
 

beejac

New Member
Joined
Jun 18, 2023
Messages
3 (0.01/day)
Did you install the driver required for flashing that was provided in 3.31-5.0
Yes, it is the same in 3.15 actually. It found a card with 5.0 and the name was correct but it couldn't pass the test nor did it show the size, i.e. It didn't seem to recognise it and it's why I had to go with the older version. Found on another forum that the 3.15 version worked with vega for another user so I gave it a shot and it found the card as it should and flashed it correctly first try.

Hope this helps someone :)
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
41,978 (6.62/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
Yes, it is the same in 3.15 actually. It found a card with 5.0 and the name was correct but it couldn't pass the test nor did it show the size, i.e. It didn't seem to recognise it and it's why I had to go with the older version. Found on another forum that the 3.15 version worked with vega for another user so I gave it a shot and it found the card as it should and flashed it correctly first try.

Hope this helps someone :)
Thanks for the additional info
 

BigT

New Member
Joined
Jul 14, 2023
Messages
1 (0.00/day)
So thanks for this it has been very helpful but im still running into a issue i have IG and im trying to flash a rx570 but i cant seem to get it right it keeps giving me a "amdvbflash.exe is not recognized as an internal or external command, operable program or batch file" what am i doing wrong any help would be great im not a super nerd YET but i know my way around this kinda of stuff lightly thank in advanved.
 
Joined
Apr 22, 2021
Messages
1,891 (1.45/day)
Location
Romania
System Name Gaming1 / Office 2
Processor Intel i7 7700k@4.8ghz / Ryzen 7 5700G
Motherboard MSI 270 SLI PLUS / MSI MAG X570S - TOMAHAWK MAX WIFI
Cooling ID-Cooling Frostflow X 120 - Liquid / ID-Cooling SE-903 V2
Memory 2x16GB Corsair Vengeance LPX 3600 Black / 2x16GB Corsair Vengeance RGB Pro SL - 3600Mhz
Video Card(s) XFX RX 6600XT 8GB / XFX RX 5700XT THICC III Ultra 8GB
Storage 1st : 1x SSD Samsung 980 Pro 1Tb + 4x SAS HDD in RAID / 2nd : 1 Tb SSD Nvme Samsung 980 Pro 1Tb
Display(s) 2x Dell 3008 WFP
Case CoolerMaster HAF 932 / GENESIS IRID 300
Audio Device(s) Soundblaster XFI / Onboard
Power Supply Seasonic Focus 850 W / Seasonic Focus 850 W
Mouse Logitech G502 HERO / Logitech G5
Keyboard Dell SmartCard Reader SK 3205 / Dell SmartCard Reader SK 3205
Software 1st - Win 10 Pro X64 / Win 7 X86 / Ubuntu / 2nd - Windows 11 Pro x64
Would you be so kind and tell us if you use CMD window with admin privileges ?
It is required to use CMD with admin privileges in order to function properly.
 

Attachments

  • CMD with admin priv.jpg
    CMD with admin priv.jpg
    149.4 KB · Views: 316

Donut

New Member
Joined
Jul 15, 2023
Messages
2 (0.00/day)
Thank you for your guides eidairman1, worked for me to salvage a $20 RX580 that was used for mining.
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
41,978 (6.62/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
Thank you for your guides eidairman1, worked for me to salvage a $20 RX580 that was used for mining.
Sure, being a mining abused card, I would suggest you replace the thermal paste with good stuff and look at the thermal pads
 
Joined
Sep 28, 2020
Messages
70 (0.05/day)
Hey, i used tpu guides to flash R9 390. Now i have to flash RX 470 that was prolly used for mining. Flashing R9 390 was very simple, simply booted atiflash, used the commands. But with RX 470 i see there is more to it, they have different memory vendor versions. Is there anything else apart from memory size/vendor and obviously gpu vendor/model i have to be careful about ? The guide for polaris you wrote up there appears to be done from windows instead of booting atiflash. Just wanna be sure i dont brick this thing.
 
Joined
Apr 22, 2021
Messages
1,891 (1.45/day)
Location
Romania
System Name Gaming1 / Office 2
Processor Intel i7 7700k@4.8ghz / Ryzen 7 5700G
Motherboard MSI 270 SLI PLUS / MSI MAG X570S - TOMAHAWK MAX WIFI
Cooling ID-Cooling Frostflow X 120 - Liquid / ID-Cooling SE-903 V2
Memory 2x16GB Corsair Vengeance LPX 3600 Black / 2x16GB Corsair Vengeance RGB Pro SL - 3600Mhz
Video Card(s) XFX RX 6600XT 8GB / XFX RX 5700XT THICC III Ultra 8GB
Storage 1st : 1x SSD Samsung 980 Pro 1Tb + 4x SAS HDD in RAID / 2nd : 1 Tb SSD Nvme Samsung 980 Pro 1Tb
Display(s) 2x Dell 3008 WFP
Case CoolerMaster HAF 932 / GENESIS IRID 300
Audio Device(s) Soundblaster XFI / Onboard
Power Supply Seasonic Focus 850 W / Seasonic Focus 850 W
Mouse Logitech G502 HERO / Logitech G5
Keyboard Dell SmartCard Reader SK 3205 / Dell SmartCard Reader SK 3205
Software 1st - Win 10 Pro X64 / Win 7 X86 / Ubuntu / 2nd - Windows 11 Pro x64
Hello. In order to find an exact match for your card (i mean a BIOS file), we need to have some more info.
So we need to have some pictures:
1 - labels from the card(or box if you still have it)
2 - GPU-Z - main screen
3 - Open the card and make some close up pictures where we can see the codes from those memory chips (use a good light source and macro)
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
41,978 (6.62/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
Hey, i used tpu guides to flash R9 390. Now i have to flash RX 470 that was prolly used for mining. Flashing R9 390 was very simple, simply booted atiflash, used the commands. But with RX 470 i see there is more to it, they have different memory vendor versions. Is there anything else apart from memory size/vendor and obviously gpu vendor/model i have to be careful about ? The guide for polaris you wrote up there appears to be done from windows instead of booting atiflash. Just wanna be sure i dont brick this thing.
It uses cmd, 2.93 and you must have the bios that matches your ram size and brand present in the bios rom itself. Its why info is asked about the card for clock speeds even, brand and specific model
 
Joined
Sep 28, 2020
Messages
70 (0.05/day)
Sorry for late reply. I searched TPU and i think i found the right bios regarding ram size/speed, but just to be safe i will post the data here so you can double check. Then i will have questions about the flashing itself. I did a lot of bios modding for R9 390, solving high power usage during light video/youtube stuff. Brought my pc usage from like 150W to under 70W during video playback, so simple reason and solution, cant belive amd/Asus didn't fix it ... So i did bios flashing in the past, but i will need to be careful to see how flashing the R9 470 differs.

There is just 1 bios that completely matches my gpu on TPU, 4gb & Hynix. Let me know if i am correct. Tnx :)

1. In the attachment
2. In the attachment
3. In the attachment
 

Attachments

  • 1.gif
    1.gif
    24.3 KB · Views: 274
  • 20231104_191734.jpg
    20231104_191734.jpg
    1.1 MB · Views: 247
  • 20231104_191750.jpg
    20231104_191750.jpg
    2.7 MB · Views: 227
  • 20231104_191823.jpg
    20231104_191823.jpg
    2.9 MB · Views: 226
  • 20231104_192223.jpg
    20231104_192223.jpg
    2.7 MB · Views: 301
Status
Not open for further replies.
Top